Headerbild
Products / Accessories

Installation

In this area you will find all the parts and tools needed to install your system

SmartBracket

The SmartBracket is the base of the DataCollect Installation Concept* for it´ s product range of SDR, eTube receiver station and the SolarSystem.

The solid steel construction will allow a fast and secure installation at poles with a diameter up to 160 mm. The installation at poles with bigger diameter can be done via steel bands.

 

Easy installation by 1 person.
Step 1) Installation of the bracket at a pole
Step 2) Hook on of the SDR, eTube
Step 3) Slide lockbar, lock

Weight SmartBracket: 2 kg
Weight of C-profiles (2 pieces): 0,3 kg
Dimensions of SmartBracket: 235 × 228 × 40 mm
Dimensions of the C-profile: 25 × 200 × 32 mm

 

Weight SmartBracket deep: 3 kg
Weight of C-profiles (2 pieces): 0,3 kg
Dimensions of the SmartBracket deep: 235 × 228 × 100 mm
Dimensions of the C-profile: 25 × 200 × 32 mm

SmartBracket deep

The SmartBracket deep is the base of the DataCollect Installation Concept* for it is DSD speed display (SID) but also can be used to house a PowerUnit for the SDR and eTube receiver station. The stable galvanized steel version enables quick and safe installation on masts from 40 mm diameter.

The solid steel construction will allow a fast and secure installation at poles with a diameter up to 160 mm. The installation at poles with bigger diameter can be done via steel bands.

 

Trouble-free one-man assembly.
Step 1) Installation of the bracket at a pole
Step 2) Hook on of the DSD
Step 3) Slide in of PowerPack or PowerUnit
Step 4) Slide lockbar, put battery plate in place, lock padlock

 

* DataCollect Installation Concept:
The advantage of the DataCollect Installation Concept is the separation of the total equipment weight into separate installation steps. This enables the user to do a one person installation with small weights step by step rather than do an installation of a one piece heavy weight product.

 

Allen key

The Allen key is an „One for all“ device and can be used to fix all DataCollect SmartBracket installation products.

 

Screwdriver: Hex Plus, 6.0 x 200
Weight: 0,1 kg
Dimensions: 235 × 100 × 20 mm

 

Steel cylinder lock: rustproof, seawater resistant
Weight: 0,2 kg
Dimensions: 65 × 45 × 14 mm

Steel padlock

High quality stainless steel padlocks are compatible with all our products.

 

Aluminium tripod

The light weight and solid Aluminium tripod will be used to operate the DSD or SDR in short time mobile applications.

By using the tripod the system installation time can be minimized to a few minutes.

 

Weight: 2,5 kg kg
Dimensions: 2000 × 900 × 900 mm

 

Weight: 22,0 kg
Dimensions: 1750 × 1000 × 600 mm

Steel tripod

The heavy and solid Steel tripod will be used to operate the DSD or SDR in short time mobile applications even at windy weather conditions. By using the tripod the system installation time can be minimized to a few minutes.

 

Laser 45

The Laser 45 is the ultimative tool to determine the exact and reproducable 45° horizontal installation angle of the SDR side radar classifier.

If accurate speed data is important for the user, then an exact horizontal installation angle setup is a must! The Laser 45 will be hooked up to the SmartBracket installation bracket via air socket and the laser pointer can be used in combination with the DataCollect Angle finder to adjust the horizontal installation angle of the SmartBracket.

 

Laser class: II
Battery: 2 x AAA 1,5V
Weight: 0,4 kg
Dimensions: 200 × 160 × 100 mm

 

Angle indication: 360 Grad
Weight: 0,02 kg
Dimensions: 92 × 80 × 15 mm

Angle finder

The DataCollect Angle finder will enable the user to determine an exact vertical angle of the SDR radar traffic classifier.

The red reflective foil on the back will be used as a reflector for the laser light of the Laser 45 calibration tool during the horizontal angle finding process.

 

 
Would you like to learn more?

Then contact us!

CONTACT NOW

Our specialists will be happy to advise you.
Or call us: +49 2273 5956-110